67 4k
 

Yes on the water pump pulley, yes on the Vac advance hose should be rubber to steel line setting in a clip back to rubber into distr..
Is the carb a List 3910? Is the distributor a 1170?

The right side valve cover is not correct, it is correct for 1969.

Nice car!

The dipstick tube should be shorter and the dipstick will have a salmon color tip

Thanks for all the comments so far.
I have ordered the correct vacuum advance line hard tube and retainer and the correct PCV hose retainer, correct clamps for radiator and heater hoses, correct heater hose retainer and will be trying to address some of your other comments.

Carb is correct, but not correct date. Valve covers will be hard to find correct. Will look at distributor number soon. Will check out fan clutch. Need to find deep groove fan pulley.

Thanks and if you see more, please let me know.

Nice looking car. Any idea what is going on with the plug on the front side of the passenger head. It should protrude out, not stick in.

Jason

Playing spot the differences is always fun. Here are some screenshots from the assembly manual that may help.

Also I think original valve cover gaskets are silver painted cork?

Jose

Those exhaust manifolds don't look right for a '67 either. :no:

The PTB ink stamps are not visible on '67s and are hidden by the front fenders.

Ptb
 

Learning new things about the 4K cars. When I had the fenders off my car for painting I noticed one orange P behind the fender on the right side. That area of the cowl is still original paint on my car. Good information Jon, thanks.

Richard

P T B stamps on Gradys Red 67 for re;