The Supercar Registry
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   Dz blocks (https://www.yenko.net/forum/showthread.php?t=158838)

Salvatore 01-08-2020 12:50 AM
Quote:
Originally Posted by NorCam (Post 1478042)
Standard block with a good date will typically be anywhere from 3K to 4K. Hard to find dates can push the envelope. Cranks anywhere between $600 to $1200 and standard/standard grinds always seen to go towards the higher end. Are the rods and slugs still there?
But if it isn't the original block to the car its not really worth that kind of money in my opinion.

ALLZS 01-08-2020 12:30 PM
yes that would be nice to find the car it belongs to if it is still alive ??

Jonesy 01-08-2020 04:15 PM
Partial VIN will be down on the rough casting area by oil filter.

Unreal 01-08-2020 08:30 PM
You sure it's not a Ford? I see a little Ford Blue paint! :)

ALLZS 01-08-2020 09:38 PM
looks like N684512 THE N&6 are very light but the 84512 is clear

Mr.Nickey Nova 01-08-2020 10:29 PM
It's good that you can read most of the vin. Most times, you can't read the vin down by the oil filter. I heard that some blocks weren't stamped with a vin, if this is true??

ALLZS 01-08-2020 10:33 PM
the guy that stamped must have been right handed !

Jonesy 01-08-2020 11:01 PM
You sure about that second number being an 8? That would make this engine a bit too early for that VIN. Is it a 5 or 6?? Got pics??

rszmjt 01-08-2020 11:05 PM
Seems a lot of blocks the N is not as clear, the fonts probably wore a lot from repeated use at the Norwood plant.

rszmjt 01-08-2020 11:06 PM
Quote:
Originally Posted by Mr.Nickey Nova (Post 1478282)
It's good that you can read most of the vin. Most times, you can't read the vin down by the oil filter. I heard that some blocks weren't stamped with a vin, if this is true??
I’ve seen a few blocks with no vin, last one was a 02 car


All times are GMT. The time now is 06:39 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.